The successor to our high flow dual hole transferport; we have managed to optimize and even enlarge the air passage in this new version 2 of our High Flow V2 Dual Hole Transferport. The V-shaped transfer opening makes sure you will have the maximum and smoothest air passage area. The middle support bridge divides the transfer port into a dual hole port. This middle bridge makes sure the pellet or slug nose cannot fall into the enlarged transferport hole, but will be guided smoothly by the middle bridge into the barrel. This set also includes our high flow, stainless steel, pellet and slug probe. Together, this set will give the maximum airflow behind the projectile. The dual hole transfer port has 76% larger air passage area (in .22) Medio 2021 the black color will be replaced by plain stainless steel. These sets are developed for slugs and pellet use! and can be used in combination with our power tuning hammerspring

We have modified the o-ring groove dimensions and and locating notch of the transferport to be compatible with both the newest rifles as well as the older versions from FX. Before tightening the grubscrew that holds the barrel in the breech, make sure the barrel is adjusted properly so the magazine slides in and out smoothly.

Please note:

FX uses a medium strength treadlocker to fixate the transferport to the barrel to prevent the barrel coming loose. We strongly advice you to use a treadlocking adhesive like Loctite 2400 also. Any modification done to the airflow of your rifle, will affect the entire setup and performance, you might need to re-adjust the settings of your rifle again to get the best possible performance.